44 2033180199

Crystallographic orientation, nanoindentation, and tensile properties relationships in Q&P and HSQ&P processes

Prof. Dr. Mohammad Masoumi

A novel quenching and partitioning process (Q&P) including the hot straining process (HS) has been recently introduced as an alternative to optimize mechanical properties in TRIP-assisted steel, which is of great interest to the automotive industry. This combination of processes is here called Hot Straining and Quenching and Partitioning process (HSQ&P). In this work, two Q&P conditions and four thermomechanical treatments (HSQ&P) were studied, using two straining temperatures (750 °C – HSQ&P750, and 800 °C – HSQ&P800) and two quenching temperatures (318 °C and 328 °C). The partitioning step was performed at 400 °C for 100 s in all cycles. Microstructural features were comprehensively studied using electron backscattered diffraction and nanoindentation techniques. HSQ&P samples showed a good combination of ductility and high-strength due to the presence of: retained austenite, intercritical ferrite with low stored internal strain energy, grain refinement via DIFT-effect (deformation induced ferrite transformation), martensite, and bainite. Significant internal stress relief was caused by carbon partitioning, which was induced by the DIFT-effect and the partitioning stage. This also led to a considerable stored energy, which was characterized by the Kernel average dislocation and geometrically necessary dislocation analysis. In addition, predominant {110}//normal direction (ND) crystallographic texture was identified, which promotes slip deformation and enhances the mechanical properties. Moreover, remarkable amounts of fine film-like retained austenite oriented along compact crystallographic directions (i.e., and ) were observed. Finally, subsize tensile test verified the optimum mechanical behavior of HSQ&P specimens.


 
Publication d'évaluation par les pairs pour les associations, les sociétés et les universités pulsus-health-tech
Top